Foundation Bolts
You will need three suitable foundation bolts, these are available from builders mearchants or DIY stores. Your post is supplied without them, as there are many types available for different requirments, ie some people prefer bolts others prefer allen key heads( allen key heads can be drilled out for additional security.
Drill bits The drill bit should be sized according to the foundation bolts purchased.

1/ Please read the important notes below.

2/ Place post in desired position insuring that the post is free from obstructions.

3/ Using the post-base plate as a template mark the position of the three holes.

4/ Remove parking post base plate and drill holes using a suitable drill bit.

5/ Reposition the base plate and check holes are in alignment .

6/ Position the post again and tighten the foundation bolts..


Important Notes
When deciding the loacation of the parking post, ensure that you avoid installation near drainage covers etc, to try to prevent drilling near pipes or cables. If in doubt consult a qualified builder for the installation of this fold down parking post. This parking post is made of heavy weight steel, to prevent injury to yourself, please ensure that the post is lowered slowly
This product carries a 12 month guarantee against manufacturing defects, in the unlikely event that a fault should occur, please contact us.
The fold down parking post has been designed to act as a deterent against theft, however theft can occur even though various security devices are fitted. This does not effect your statutary rights